ACTONEX is the designer and manufacturer of automated safety solutions. Everything we do, think, and create is designed to help you achieve safety. The result of this philosophy: solutions that provide maximum safety and uninterrupted plant operations.
ACTONEX models are designed for medium to large applications. The modular unit to install up to eleven 19” 3-unit high anodized aluminum racks. The racks are installed a steel cabinet with revolving rack and acrylic glass door. The first rack includes the operator interface display, and the keyboard Additional racks are composed by one or two CPUs and 15 slots for installation of I/O cards.
The configuration is arranged by type and number according to the requirements of the system to be protected. Each card in the rack is connected to field devices by prewired connectors connected to electromechanical terminal blocks.
ACTONEX solutions increase your efficiency through
Full integration with DCS & ESD operating and monitoring functions
The advantages of a ACTONEX solution, can be combined with all leading distributed control systems (DCS) & emergency shutdown (ESD) via industrial protocol.
Automatically updated If the system diagnoses an internal fault, the module involved can be replaced quickly during operation. Only a few moves are required. If a processor module is swapped, the new module is automatically brought up to date with the currently operative modules. The parameter setting and the user program are imported from the functional processor module and then loaded. “Self- diagnostic” has other benefits for the user:
– Your inventory of spare parts will be smaller
– You do not have to search for correct software versions
– When replacing a processor module, you do not have to connect a computer.
According to IEC 61508 and IEC 61511, every safety system must be subjected to a proof test at regular intervals. A proof test is designed to reveal any faults, so the system can be restored and fulfil its intended function.
The proof test interval for ACTONEX semiconductor modules is 1 years. In the relay modules, the current and number of switching cycles are measured to test the status of the relay. This means that, depending on the load of the relay, the relay module can continue to be operated after the proof test and does not have to be replaced.
ACTONEX controller can be subjected to a proof test by testing the entire safety circuit. In practice, a shorter testing interval (6-12 months) is required for the field unit’s inputs and outputs than for the ACTONEX controller.
Transparent, fast diagnosis
Detailed information via LEDs tests its own functionality regularly, using self-diagnosis. This diagnostic information can be observed on the modules themselves via colored LEDs that show the full range of operating statuses. You can see at a glance whether redundant parts are available, whether the system bus is working properly, whether an internal fault has been recognized in the system and whether a fault exists in the field. Because more than 90 % of all faults originate on the field side, it is important to detect faults such as short circuits and wiring breakages quickly. ACTONEX indicates the faulty channel, saving you the time it would take to find the fault. Internal diagnostic, the fully integrated engineering tool, can be used to obtain more detailed information via its online diagnostic features, which display operating statuses over time. You can connect a computer running software at any point in the network, further speeding up the search for faults.
The system components
Faster, more powerful, more efficient
ACTONEX defines a completely new performance category. Its power is based on high-performance system components and intelligent system architectures, including: